OK, thanks guys, I really would not put my suspension in the classification of 'too much lift'. It sits nose up with a 12mm droop at the rear from level. I am heading down to Dobinsons tomorrow to pick up another set of rear coils and they are rated at 30mm above standard height. The fronts are a 75mm lift above standard, however the weight of the mitor and hardware brings it down - certainly does not look like a monster truck or even lifted in my view.

Anyway, I have to do something, so will swap the driveshaft end for end, and also do the PSR crossmember cutout. I did this for the rear driveshaft, however it was for a bare chassis during the build. Will see how it pans out, let you know.