-
29th March 2016, 07:19 PM
#1
Expert
Ignition key alarm disconect
How do you disconnect the annoying ignition key alarm in a 2012?
When the motor is off but the keys are in the ignition and when the door is open the annoying alarm just won't shut up.
-
The Following User Says Thank You to rusty00 For This Useful Post:
Rob Poynter (20th June 2017)
-
29th March 2016 07:19 PM
# ADS
Circuit advertisement
-
29th March 2016, 07:40 PM
#2
Patrol God
Hope this helps.
-
The Following 5 Users Say Thank You to Hodge For This Useful Post:
Bigcol (1st May 2016), Col.T (29th May 2016), Rob Poynter (15th November 2017), Roosim (3rd April 2016), rusty00 (29th March 2016)
-
29th March 2016, 07:44 PM
#3
Expert
Thanks heaps.
It drives me nuts and the pasangers.
-
-
3rd April 2016, 09:47 AM
#4
Expert
Bliss, all done.
Thanks again
-
-
3rd April 2016, 07:08 PM
#5
SOLD !!!!! White 2010 GU DX, bull bar, rear drawers, reversing camera, factory snorkel, pioneer roof rack, scangauge, dual battery, awning ....
-
-
3rd April 2016, 08:39 PM
#6
Legendary
Me to thank you
Sent from my iPad using Tapatalk
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
-
-
1st May 2016, 10:19 PM
#7
Finally got the shites with the 'key in ignition' alarm so tried the 'easy fix'. Thought I should get some help but seemed easy and what could go wrong...
So ended up with fine copper wire and bits of plastic all over the place ! Tried to glue / solder etc but no dice. Looks like a new IMMU thingy is needed. Any ideas to the best place to get one fast ?
SOLD !!!!! White 2010 GU DX, bull bar, rear drawers, reversing camera, factory snorkel, pioneer roof rack, scangauge, dual battery, awning ....
-
-
2nd May 2016, 09:01 PM
#8
Originally Posted by
Roosim
Finally got the shites with the 'key in ignition' alarm so tried the 'easy fix'. Thought I should get some help but seemed easy and what could go wrong...
So ended up with fine copper wire and bits of plastic all over the place ! Tried to glue / solder etc but no dice. Looks like a new IMMU thingy is needed. Any ideas to the best place to get one fast ?
Try Nizzbits.
-
The Following 2 Users Say Thank You to Yendor For This Useful Post:
dermie72 (26th February 2017), Roosim (2nd May 2016)
-
4th April 2024, 03:02 AM
#9
How do you disconnect the ignition key alarm, in a 2012 GU8?
Last edited by Sternotherus90; 11th April 2024 at 07:56 PM.
-