All sorted, jars of turds enroute to the Hills
Sent from my iPhone using Tapatalk
All sorted, jars of turds enroute to the Hills
Sent from my iPhone using Tapatalk
We should've hung on to this fella for a bit longer when he visited a couple of weeks ago!Originally Posted by MB
Little Buggers Cuppa MateSee if you can track down some FNQ Python
Poo
. Apparently if you hide it around your home or under your bonnet I imagine too, Rodents won’t come within a Cooee whiff
We got smashed in the Hills down here over winter by Rats, they took out Rossco’s GQ heater hoses and gnawed through my GQ brake master cap. Searching for some Vic-Pet Python Nuggets myself at the moment
Sent from my iPhone using Tapatalk
Amethystine (Scrub) Python.jpeg
2006 4.2TDi ex-Telstra Remote area Camper. Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies
A Nomadic Life (Blog)
He’s Beautiful Cuppa Tea’s Legends
Any chance He left some shedding behind, best turbo heat wrap for rodent dissipation I heard
Sent from my iPhone using Tapatalk
Nipped up the front wheel bearings and fitted Hub Saver Rings from Patrolapart. The rings are quite a lot beefier than I thought they were going to be.
My advice is: not to follow my advice.
Careful not to over torque them Craigstar, they are soft.
Please don’t ask ‘exacts’ tonight but its about load carefully spreading across nip/nip/nip/nip… need my shed circa 25nm bookies but have a shocking memory
Sent from my iPhone using Tapatalk
‘Hub-Savers’ meant Brother, super soft, please be careful and spread their intended load evenly
Sent from my iPhone using Tapatalk
mudnut (23rd September 2022)
Bugger. Torqued them to factory spec. Will inspect them tomorrow to see if they are toast. But I did tighten each bolt in a cross pattern, so should be ok.‘Hub-Savers’ meant Brother, super soft, please be careful and spread their intended load evenly
Sent from my iPhone using Tapatalk
My advice is: not to follow my advice.
MB (24th September 2022)
Fresh engine oil and filters all 'round this morning. Weather is glorious...
Completely lost track of time, would you look at that ...
Screenshot 2022-09-30 112714.png
2005 TD42TI
BrazilianY60 (20th December 2022), Cremulator (30th September 2022), MB (1st October 2022), mudnut (30th September 2022), Plasnart (30th September 2022), Rossco (3rd October 2022), Touses (30th September 2022)
Cut 8mm off the ends of both brand new RCV cv and axles just purchased because they are supplied too long from the factory. Circlip groove has already been recut to suit the right location as well, Pretty disappointing to be honest. RCV knows about the issue but stil supplies them incorrectly, like WTF is the point, laziness.axle disks.jpg
Last edited by PeeBee; 1st October 2022 at 05:13 PM.
Preping the Patrol for Cape Jaffa. Once a year oil change, even though it hasn’t done 5k in a year, lol. And decided to spray the underbody with this just for some added protection against the salt water.
Deodorised my ass! This shite stinks! I might have to do the rest on the day we leave. My garage really pongs!
Sent from my iPhone using Tapatalk
BigRAWesty (4th January 2023), BrazilianY60 (20th December 2022), Cremulator (21st December 2022), MB (25th January 2023), mudnut (3rd January 2023), Rossco (21st December 2022), Stropp (20th December 2022)
Reply With Quote
