What did you buy today

[Rossco]

YAY nice one

Sent from my SM-G781B using Tapatalk

[BrazilianY60]

Fixed unit in position with Velcro for now.

Man, I love the GU4 center dash part! What is all that stuff going on there? Can you give me a brief tour on all those gauges and modules and stuff you got there?

[Bidja]

Man, I love the GU4 center dash part! What is all that stuff going on there? Can you give me a brief tour on all those gauges and modules and stuff you got there?

Gadgets that sometimes put my head into a deeper state of confusion haha

You see part of the journey, now from bottom going up:
The radios are self explanatory.
Just above mic is an indicator (led/alarm) for the Water Watch _ diesel/water separator. hthttps://www.waterindiesel.com.au/tp://
Above hazard light is the Kings _ Throttle Control Unit: alters TPS signal sent to ECU/ECM (not used currently). Can work well with CRD drive by wire setup.

Round dial gauge is used to measure vacuum @ the VNT turbo actuator diaphragm (real time) actuator rod position which indicates the VNT vane aperture opening positioning within limits set. Vac gauge also shows the change rate of the vanes aperture relative to boost pressure and MAF voltage (MAF V measures by the multi meter at top of dash). MAF voltage is taken from MAF sensor (back probe connector or as I now have spliced into ECM harness). MAF voltage correlates to MAF rate (g/s) measured.

I play/trial with various boost control methods.

By the way the other two (in counsel cutout), the aux/main battery monitor plus electronic brake controller for tow.

Out of sight the (usual): EGT, Boost(relative), Oil and scan gauge.


.

[Stropp]

CD45A770-11B2-4A33-8638-14DEEECE0FEA.jpeg ordered some rock sliders as I’ve bent the side steps a bit.

[MB]

Well Done Stroppstar, they look Strong As
If it’s not too late are they able to infill them for you with say Checker or small hole Dimple Die plate?
I really wish I had of taken that option on my open GU ute ones years ago.
Have nearly Can Opened the lower sills on mine twice in ruts with sticks that pricks inlay to get height clearance through.
Our front tyres pop them up and they spear head in between open sliders like mine and if unnoticed in time or too fast it’s a lower panel/door disaster


Sent from my iPhone using Tapatalk

[Stropp]

Well Done Stroppstar, they look Strong As
If it’s not too late are they able to infill them for you with say Checker or small hole Dimple Die plate?
I really wish I had of taken that option on my open GU ute ones years ago.
Have nearly Can Opened the lower sills on mine twice in ruts with sticks that pricks inlay to get height clearance through.
Our front tyres pop them up and they spear head in between open sliders like mine and if unnoticed in time or too fast it’s a lower panel/door disaster


Sent from my iPhone using Tapatalk

Hi mate, I’m getting them raw and have some alloy checker plate here so will cut to suit and drill n tap a thread and put button head Allen bolts in to hold them.

[Mickhead]

Being a devoted Vegan/Cyclist, I unfortunately/finally ran out of crop space, shared country water too, to keep up my brain proteins growth mega hectares per 3,000m2 needed hourly ( 1 skinny man per x mega 3 hyper dramatic tarts)
Had to sadly employ a barbaric shooter to keep the Indian Minor’s from pecking on my Foxy friends back whilst he was protecting my foreign crops from being attacked by the cutest Bunnies me and my 3 wives have ever seen

CE3E43FE-2872-4738-9EA9-7B21503529D7.jpeg
Sent from my iPhone using Tapatalk

Vegan farking cyclists 😂

[MB]

Hi mate, I’m getting them raw and have some alloy checker plate here so will cut to suit and drill n tap a thread and put button head Allen bolts in to hold them.

That’s the GO Stroppstar, they’ll be Excellent


Sent from my iPhone using Tapatalk

[PeeBee]

CD45A770-11B2-4A33-8638-14DEEECE0FEA.jpeg ordered some rock sliders as I’ve bent the side steps a bit.

Are these a kit you assemble or come ready made?

[Stropp]

Are these a kit you assemble or come ready made?

Message him mate, he may do a kit