My 5t 2 poster is in the planning stages, just need to settle on the land, then the first thing that goes up is the shed and hoist - NO MORE GARGAE FLOOR for me
My 5t 2 poster is in the planning stages, just need to settle on the land, then the first thing that goes up is the shed and hoist - NO MORE GARGAE FLOOR for me
MB (25th February 2021), MudRunnerTD (25th February 2021)
So out in the shed ans pulled out the trim clip.kit I had and the one I bought the other day and am pleased there is quite a big difference between them juailtifying the purchase for sure.
]
New kit
Sent from my SM-G977B using Tapatalk
Last edited by MudRunnerTD; 27th February 2021 at 03:29 PM.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (27th February 2021)
So I bought this this arvo, I needed it for an upcoming job. Will post feedback on it soon. Can't wait to fire it up.
https://www.bunnings.com.au/makita-2...E&gclsrc=aw.ds
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (27th February 2021), MudRunnerTD (27th February 2021), Rossco (27th February 2021)
Nice mate. That will get it done for sure.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (27th February 2021)
First impressions are mixed. I'm a bit apprehensive that the body is plastic, although I guess it would have been ridiculously heavy if it was metal. I make a cut and FK me, effortless and very accurate. On that regard I am thrilled with this tool. Needed to hook up the dust extraction though.
It's actually not as loud as I thought it would be and even has a brake on the motor when it is powered off. Comes with a crosscut guide and even a push stick too which is a bonus.
One more thing, it's bloody massive!
On the whole I'm happy with my purchase.
Sent from my SM-G965F using Tapatalk
Last edited by rusty_nail; 27th February 2021 at 08:18 PM.
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
jay see (8th March 2021), MB (27th February 2021), Mickhead (28th February 2021), MudRunnerTD (27th February 2021), Rossco (27th February 2021)
Looks a Beast Nico Mate
Certainly fits the tool trolley top very well too!
Dust extraction wise, consider this 1hp 10ampy convenient Carbatec bargain Mate:
https://www.carbatec.com.au/dust-ext...ld-code-fm-230
Sent from my iPhone using Tapatalk
rusty_nail (28th February 2021)
Those Carbatec units are great, but they have a 100mm hose. Perfect if your machine has the same size attachment.Looks a Beast Nico Mate
Certainly fits the tool trolley top very well too!
Dust extraction wise, consider this 1hp 10ampy convenient Carbatec bargain Mate:
https://www.carbatec.com.au/dust-ext...ld-code-fm-230
Sent from my iPhone using Tapatalk
I tried adding a reducer to a 50mm hose to connect it to my drop saw and the Carbatec didn't inflate the bag and create the proper vortex for normal operation. Suction was almost nonexistent.
MB (28th February 2021), rusty_nail (28th February 2021)
Thanks for the info. I'm currently using a wet dry vaccum, but it obviously file very quickly especially with the thicknesser.
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (28th February 2021)
I ended up getting a Ryobi 30L wet dry vac to use on the drop saw.
You'd definitely need something bigger for use with a thicknesser.
Well I'm very very happy now with both the saw and the thicknesser. Yes, for the perfectionist out there, it isn't buzzed and therefore not perfectly straight but I can only make do with the tools I have. This is naturally seasoned messmate from the bush across from mine, intended to become a coat hook with old railway pins mounted when it's finished. Stoked with how easy it was to get the timber to this stage and how quickly too.
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Cremulator (28th February 2021), jay see (8th March 2021), MB (28th February 2021), MudRunnerTD (28th February 2021), Rossco (28th February 2021)
Posting Permissions
Reply With Quote
