Sounds like a wire is touching somewhere. Earthing the oil pressure light circuit.
Sounds like a wire is touching somewhere. Earthing the oil pressure light circuit.
mudski (15th January 2021)
Yeah I think it maybe in the relay box where the issues are coming from. I’ll look at it when I get home now as a couple of 79’s just pulled up camp across from us a about six bogans jumped out all loud and proud. I can’t be seen under the bonnet of a Patrol in front of these buffoons. Lol.
Sent from my iPhone using Tapatalk
Easy as Mark Mate, keep working away under there proudly
If they grunt/ask....just tell them you’re diligently safety checking for possible shrapnel damage from following a V8 Landcrab too closely.
Edumacate them Wally’s (with a dead straight face) that their rear tyre spacers to get back aligned on front track on the cheap might have also cracked open too....a bearing or two!
Give it 30mins thereafter....they’ll all be under their own arse ends having a snoop
BTW: If they come back again, ask them how their ‘Sump Dust Extractors’ are going?
EDIT: Whoops, meant their ‘Alternators’
Sent from my iPhone using Tapatalk
Last edited by MB; 15th January 2021 at 07:18 PM.
All good mate. A few came over and were asking about the high mount wedged in the ARB bar, I just said it was there purely for Landcrab recoveries, to help a fellow out, as I won’t need it. To my surprise they just said “yeah good onya mate” raised their tinnie’s and we chatted on.
Sent from my iPhone using Tapatalk
Please do be careful, don’t get sucked in Brother Mark Mate!
Keep a good faithful eye on your glass/beer hole too, they’ll try and get you them buggerers
Sent from my iPhone using Tapatalk
So I finally got to the bottom of the dim oil pressure switch and no working Carter fuel pump issues.
This...
IMG_3943.jpg
I stumbled across it hidden in a loom in the engine bay. It supplies ignition power to the relay for the Carter pump. Still had continuity though, not a lot, hence giving me weird readings from the DMM. This is the result of years of adding things in and forgetting how you wired them in. So I spent six hours today re wiring part of the loom that goes from the engine bay and into the dash. Fixing a few other things up on the way.
Happy Chappy now. Working pump and oil light, and also no front end knocks.
Sent from my iPhone using Tapatalk
Last edited by mudski; 23rd January 2021 at 09:08 PM.
Also have the old GUrl a wash.
IMG_3939.jpg
Sent from my iPhone using Tapatalk
Avo (28th January 2021), MB (24th January 2021), Rossco (23rd January 2021), rusty_nail (23rd January 2021)
Nice shed
Sent from my SM-G986B using Tapatalk
mudski (23rd January 2021), rusty_nail (23rd January 2021)