Getting back to this.

Test fit and the plate looks to fit pretty good.

Bolting the fairlead through the bullbar and into the plate I have a few different options.

1. I'll will need to make the opening a little bigger or the fairlead won't sit flat on the plate.

2. Taking 3mm (thickness of bullbar) off the back of the fairlead will leave me with 5mm wall for the unbrako to sit in.

3. Don't cut or mill anything and have a 3mm gap between the plate and the fairlead.

Option 3 would be easier and would allow water to run through.

Thoughts please...



Sent from my CPH1979 using Tapatalk