Driving back from the Peninsula this afternoon and I split a heater hose doing 100km/h about 15 minutes away from home. Managed to pull over and stop almost straight away, the steam from the coolant that sprayed everywhere made it abit to hard to find the fault. While I was waiting this bloke pulls over and asked if I need a hand. I explained that I was just waiting for the steam to die down to see which hose crapped itself. Nice and easy to see, split about 25mm long on the top side of the hose. Now I use to have a small amount of tools in the back, but haven't had then in for a while. Young (well under than me) bloke had a handful of tools, cut off yucky bit and refit. Took about a liter of water. Thanked him for stopping and having some tools. I do believe in good karma, something good will go his way.
Now the hose that needs replacing is the one that has the dogleg elbow, it goes to the top fitting into the firewall.
Is this it.
https://patrolapart.com.au/product/n...ter-inlet-hose
Sent from my CPH1979 using Tapatalk
Actually I think this is the correct one. Can anyone please confirm
https://patrolapart.com.au/product/n...wall-to-joiner