Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I've been chasing some bad wiring on my 98 Gu wagon for a while now. Currently all the wiring coming out of the AC button on the dash has melted together. I have replaced all that I can get access too with a cut from another car but wanted to trace it to the next location. There is a red wire that comes out of the AC button, it seems to be the culprit, does anyone know where it travels too after the AC button?? So I can either run a new wire or replace the bad one. My GU was originally an rd28, now converted to a TD42 by the previous owner.
Can't help I'm afraid, but am concerned if the plan is just to replace wires without first establishing the cause of the melting, it could at best reoccur, at worst result in a fire.
2006 4.2TDi ex-Telstra Remote area Camper. Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies A Nomadic Life (Blog)
Last time I had to rewire a part of a loom was because rats had chewed into it and had mashed the copper cores together. If the vehicle has had an after-market alarm or other accessories fitted, you really need to check all of the looms.
Last edited by mudnut; 14th February 2020 at 09:27 AM.
Reply With Quote
