What did you do to your Patrol today!

[MB]

6” Lift & 42’s to come brother, will make a bandstand atop for Animal and the Gang



Sent from my iPhone using Tapatalk

[Bidja]

So U are diversifying and getting into jam transportation....

[Winnie]

Very nice MB! Many cold tinnies up in the mountains for sure.

Sent from my SM-G960F using Tapatalk

[nissannewby]

Filled it with fuel and Washed it. Someone is interested enough they want to put a deposit on it. So the big girl might be gone this week 😔

[Bidja]

Took her for a run up the mountains today, up to Lake Eucumbene to see how recent mods shaped up.
FMIC, new fuel pump, bonnet louvers and running Tillix boost controller along with VNT vac solenoid (Procharge stage 3 h/f turbo). Running a max boost 28psi.

Very responsive and hauled very well nom 140rwkw and 520N-m. Lugs and gains well from 1500rpm and holds on full load. 11.3 l/100 over 400ks.

EGTs & coolant temps were good and what a cold snap, rain, hail and snowed @ 1100m. Very pleased with run.

Was going to have a fish but too much storm activity for the graphite rod.

[mudski]

Took her for a run up the mountains today, up to Lake Eucumbene to see how recent mods shaped up.
FMIC, new fuel pump, bonnet louvers and running Tillix boost controller along with VNT vac solenoid (Procharge stage 3 h/f turbo). Running a max boost 28psi.

Very responsive and hauled very well nom 140rwkw and 520N-m. Lugs and gains well from 1500rpm and holds on full load. 11.3 l/100 over 400ks.

EGTs & coolant temps were good and what a cold snap, rain, hail and snowed @ 1100m. Very pleased with run.

Was going to have a fish but too much storm activity for the graphite rod.

Sorry John, I haven't been on much lately due to being in the NT but why have you got a louvered plate on the bonnet instead of the scoop?

[Bidja]

Sorry John, I haven't been on much lately due to being in the NT but why have you got a louvered plate on the bonnet instead of the scoop?

No worries Mark. Fitted a PDI FMIC (600x300x76mm):

http://www.nissanpatrol.com.au/forum...101#post792101

Do not need the large scoop and took the opportunity to have a rear facing louver panel made up, works well.

http://speedex.com.au/index.php?rout...mation/contact

[Avo]

Got it back from the panel beaters,all bush pin stripping gone,2 right hand door skins and a new rear bumper
Getting the interior detailed on friday..
Going to be all shinny n shit

Sent from my SM-G930F using Tapatalk

[Clunk]

Got it back from the panel beaters,all bush pin stripping gone,2 right hand door skins and a new rear bumper
Getting the interior detailed on friday..
Going to be all shinny n shit

Sent from my SM-G930F using Tapatalk

Time for a Y62 then?

[10G]

Very nice ^^^