S should see 12v at start. Try feeding this with a direct 12v signal to test it. (jump it straight to B and it should fire).
If that fails hit it with a bigger hammer.
Seriously, have someone bash it with a hammer when you try start it.
S should see 12v at start. Try feeding this with a direct 12v signal to test it. (jump it straight to B and it should fire).
If that fails hit it with a bigger hammer.
Seriously, have someone bash it with a hammer when you try start it.
Last edited by 0-TJ-0; 30th July 2019 at 01:00 AM.
2003 GU TD42 with a few extra ponies
Posting Permissions
Reply With Quote