What is the easiest/best way to run a wire from the firewall area to my tow bar?
.jpg "jman69's Avatar")
What is the easiest/best way to run a wire from the firewall area to my tow bar?
Hi mate have a look through recent threads, this question has just been asked and answered
Sent from my SM-G930F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Actually was asked by you lol
Sent from my SM-G930F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Lift up the step plates on the front doors and run the wire along the channel, pull the moulding
off the "B" pillar and using a snake you should be able to get to the rear tail light cavity,
underneath on both ends is a large rubber grommet to pass your wire through
or you could cable tie to fuel lines along the chassis.
@rustynail my bad was typing at same time eh
Last edited by threedogs; 16th April 2019 at 02:46 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
rusty_nail (16th April 2019)
Thanks three dogs. I'll give it a go.
Rusty nail, i thought i posted that thread twice. My bad, oop's
rusty_nail (16th April 2019)
Posting Permissions
Reply With Quote