Spot Light Wiring to Front of Roof Rack

[Brissieboy]

I was wondering if anyone has run the cable up & out of a door pillar.

I have run wiring up the inside of the passenger side pillar and mounted 2 small 30amp Anderson connector pairs on a plate that mounts behind the plastic using the bolt that holds the rear passenger seat overhead hand grip (trying not to put holes anywhere that are not absolutely necessary and want the wiring totally concealed). The mounting plate also mounts one end of a curtain bar I use to provide privacy when I camp in the back.
It was a bit of work getting the wiring in as I ended up having to pull out the front passenger seat so I could get the plastic covers off and the wiring safely tucked away so it didn't interfere with the seat belt in any way.
My connections are not permanent, hence the plug/socket concept. I just run the cable out above the door - there is plenty of space there so no damage to the cable and I don't get any water ingress.sockets.JPG[edit] Not sure why, but the pic has been rotated - the left side should be up.