-
13th January 2019, 01:39 PM
#131
Thanks so much for this post mud runner! Good to see the comments are still going strong after all these years!
I just finished rebuilding my swivel hubs only on a GUII with manual locking hubs.
Love ya work
-
The Following User Says Thank You to Matty C For This Useful Post:
MudRunnerTD (13th January 2019)
-
13th January 2019 01:39 PM
# ADS
Circuit advertisement
-
14th January 2019, 09:40 PM
#132
Finding this thread very helpful so thank you Mudrunner.
But would you happen to know the part number for the CV brass washer? I cant find it anywhere
-
-
15th January 2019, 12:51 AM
#133
Moderator
Originally Posted by
Hash1112
Finding this thread very helpful so thank you Mudrunner.
But would you happen to know the part number for the CV brass washer? I cant find it anywhere
Hi mate, If your struggling i would re-use the one you have mate. they are not really a wear item.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
15th January 2019, 07:58 AM
#134
It's damaged pretty bad due to breaking the cv, I'll try to hammer and straighten it may be.
Thanks for the reply bud I really appreciate what you have done in this thread.
-
The Following User Says Thank You to Hash1112 For This Useful Post:
MudRunnerTD (15th January 2019)
-
15th January 2019, 08:04 AM
#135
The 747
Originally Posted by
Hash1112
Finding this thread very helpful so thank you Mudrunner.
But would you happen to know the part number for the CV brass washer? I cant find it anywhere
Dunno where you are mate but I have a pair of them at home in Gippsland Victoria
Sent from my SM-G960F using Tapatalk
-
-
15th January 2019, 12:20 PM
#136
Hey Winnie, thanks mate, I just bought a second hand CV and the bloke gave the washer with it
-
The Following User Says Thank You to Hash1112 For This Useful Post:
Winnie (15th January 2019)
-
26th February 2019, 11:13 AM
#137
Thanks so very much for this. So easy to follow
After doing all this I'm not sure what oil for the front diff. The hub is an auto locking thingo ma Bob... how can ya tell if the diff is lsd or not? Just worried about using the wrong oil
Cheers
-
-
26th February 2019, 12:20 PM
#138
as far as i know there is not front lsd patrol diffs, only rears. mechanics have told me you can put the same rear lsd oil into the front so thats what i do. i think its more expensive because its lsd but i dont pay for it
-
-
25th March 2019, 07:02 PM
#139
Thanks a billion MD. Your posts helped me rebuild my swivels. I bought my 96 gq with serious diff oil leak comin out swivel. I think i did it right cause its not leakin any more😅
-
The Following User Says Thank You to blayne For This Useful Post:
MudRunnerTD (25th March 2019)
-
27th March 2019, 08:04 PM
#140
Moderator
-
The Following 3 Users Say Thank You to MudRunnerTD For This Useful Post:
Clunk (27th March 2019), Plasnart (27th March 2019), Touses (28th March 2019)