Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Cheers Daz!
This is where I am at now. Not a lot more to go.
I need to grind the crank hole out on my sandwich plate to fit the larger crank of the turbo motor.
Need to install fuel pump and the lines and injectors.
Flywheel and clutch
Vac pump when it shows up.
I need a couple of adaptors for turbo oil feed and a new drain hose.
Will need to get an oil feed hose made for the vac pump
I am going to relocate the vac canister to the drivers side.
5mm spacer to be made for the tacho sensor
Reply With Quote