Would be great to get the flywheel with the motor and the PS bracket would be a winner too. Id think you could negotiate that into the deal
Would be great to get the flywheel with the motor and the PS bracket would be a winner too. Id think you could negotiate that into the deal
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Winnie (10th October 2018)
Think you should just put in a TB4.2, I know of a good motor going for cheap in Sydney, ya just need 2 get the spark plug out
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Are we going to be able to use my clutch? Mine is fairly new and I would like to use it in the new engine but have read some conflicting info on the internet.
Yep the spline is same so will be fine.
Sent from my iPhone using Tapatalk
I have read that the bolt pattern is different. Some people say that you can use a GQ clutch on the GU motor but not a GU clutch on a GQ motor.
Sent from my SM-G960F using Tapatalk
Yeah ok mine fitted perfect with no modifications.
Sent from my iPhone using Tapatalk
Okay awesome, good news cheers mate.
Sent from my SM-G960F using Tapatalk
The sandwich plate on the turbo motor is different, it has a bigger hole for the bigger crank.
I can either buy a new one or grind out the hole to the larger size.
Does anybody know the measurement for the hole to fit the bigger crank?
Sent from my SM-G960F using Tapatalk
Posting Permissions
Reply With Quote