What did you do to your Patrol today!

[jack]

Installed the Boss Coil Tower Brace Kit, piece of cake installation. Less than an hour to do the lot, coil spring compressor and no need to undo shocks or sway bar.
Just about took me longer to raise the car and remove and refit wheels. Nice bit of kit.

[Hodge]

Installed the Boss Coil Tower Brace Kit, piece of cake installation. Less than an hour to do the lot, coil spring compressor and no need to undo shocks or sway bar.
Just about took me longer to raise the car and remove and refit wheels. Nice bit of kit.

You're a better man than me Jack. How'dya go with those bolts nuts fiddling on top next to fuel lines... I invented new swear words doing those.

[jack]

You're a better man than me Jack. How'dya go with those bolts nuts fiddling on top next to fuel lines... I invented new swear words doing those.

Actually had no issues, cleaned it up and put silicone on the top plate of the brace then loosely bolted in place using the bump stop bolts. Had room to place the nuts on top, started the thread and hit it with an 18v impact driver (also used loctite). Then redid the bump stops, I will check the fuel lines to make sure they aren’t touching.