-
17th August 2018, 07:40 PM
#11741
.........
Here’s a copy & paste for us Umans!
“The question that helps us all most is what do we need, not what do we deserve”
Sent from my iPhone using Tapatalk
-
-
17th August 2018 07:40 PM
# ADS
Circuit advertisement
-
17th August 2018, 08:02 PM
#11742
Heavy man, just plain heavy
You reap what you sow, so by default you get what you deserve, as against what you might need - hows that twisted around!
Last edited by PeeBee; 17th August 2018 at 08:09 PM.
-
The Following User Says Thank You to PeeBee For This Useful Post:
-
17th August 2018, 08:34 PM
#11743
.........
Is this about cushions again?
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to MB For This Useful Post:
Clunk (17th August 2018), PeeBee (17th August 2018)
-
17th August 2018, 10:27 PM
#11744
Originally Posted by
MB
Is this about cushions again?
Sent from my iPhone using Tapatalk
Getting smashed about cushions from one side of this country to the other for some reason..... but you guys bring a smile to my face.
-
The Following 2 Users Say Thank You to PeeBee For This Useful Post:
Clunk (17th August 2018), MB (17th August 2018)
-
17th August 2018, 10:46 PM
#11745
-
The Following 5 Users Say Thank You to MB For This Useful Post:
Clunk (17th August 2018), PeeBee (17th August 2018), Plasnart (18th August 2018), Touses (18th August 2018), Winnie (17th August 2018)
-
18th August 2018, 05:01 PM
#11746
Patrol God
Not so much angry more like pissed off the timing is out on the zd30
Didn't know you had to lock the ring gear before taking the pump out
ah well lesson learnt start again Monday will just pull a part the front of
the motor to get to timing gears to line up
any one have an idea on how to undo the crankshaft nut .......easily
-
-
18th August 2018, 05:09 PM
#11747
Legendary
Bugger Roofy sux mate. Not sure on the front crank nut it's a big bugger, looong breaker bar or bloody good impact? Why does the crank nut have to come off?
Sent from my SM-G930F using Tapatalk
-
-
18th August 2018, 05:43 PM
#11748
Patrol Freak
Originally Posted by
Sir Roofy
Not so much angry more like pissed off the timing is out on the zd30
Didn't know you had to lock the ring gear before taking the pump out
ah well lesson learnt start again Monday will just pull a part the front of
the motor to get to timing gears to line up
any one have an idea on how to undo the crankshaft nut .......easily
If eng out, lock up flywheel and you need to give the nut a sudden knock force with hammer or lump of wood using a ring spanner or socket & bar what ever U are using. A sudden impact force has far greater effect than just applying pressure/torque. If engine is in veh & transmission connected, locate breaker bar against something solid and some give the starter a flick. Or try just putting in 1st gear, get someone to put foot on brake/hand brake(all) and give the ring or socket/bar a sudden knock like when locking the flywheel. Rather use a socket and breaker bar.
2008 GU WAG ST Manual CRD - To do the job
-
The Following User Says Thank You to Bidja For This Useful Post:
Sir Roofy (18th August 2018)
-
18th August 2018, 07:52 PM
#11749
Administrator
Lachy destroyed iPad screen number 5!
Sent from my iPhone using Tapatalk
-
-
18th August 2018, 07:53 PM
#11750
Administrator
Genuine question as I'm slowly losing my shit doing this on my own folks. Crazy autistic child proof demon child iPad covers?
Genuine frigging question as I'm at a loss now!
Sent from my iPhone using Tapatalk
-