it was a absolute b!tch to fit took Oppisite Lock most of the dayOriginally Posted by kingy
and i cant find a spacer plate to fit the fairlead to move it forward , not sure i like the idea of washers behind the fairlead
it was a absolute b!tch to fit took Oppisite Lock most of the day
and i cant find a spacer plate to fit the fairlead to move it forward , not sure i like the idea of washers behind the fairlead
HELL NO !!!!!!
make the plates your self out of a bit of flat,looking at your pics thats your only option
mesaure up and check it twice and the jobs done
good luck
nowoolies (3rd May 2011)
have a bo peep at the pic this is direct from the nissan website....
GU IV Patrol
NADS, 3" Lift, Snorkel, Steel BB, Kaymar Rear Dual Wheel Carrier, Drawers,Cargo Barrier, 33" Muddies, Tipple Batteries, 60 Ltr Fridge to keep my Beer cold and more Ocky straps than any human being would ever need.
thanks kingy
i just got a idea put a skid plate from under the bottom roller to over the leading edge of the bar work
i have used the winch twice and its getting cable cuts in the front of the bar
thanks mate
kingy (3rd May 2011)
Hey that would work....make 2 and I will buy one of ya
As mentioned have got a Warn XD9000 to install sooner or later.
Cheers
GU IV Patrol
NADS, 3" Lift, Snorkel, Steel BB, Kaymar Rear Dual Wheel Carrier, Drawers,Cargo Barrier, 33" Muddies, Tipple Batteries, 60 Ltr Fridge to keep my Beer cold and more Ocky straps than any human being would ever need.
where's the piccies Paul,????????? We need more piccies!!!!!!!! hahahahahaha
See I told you I would never stoop so low as to Hi-jack any one's thread, seeing as you're not just anyone!!!!!! roflmao
here I am, Pauli !!
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
so you really want it huh !!!!!!!!
Ok you getting it
Posting Permissions
Reply With Quote