Quote Originally Posted by Hodge View Post
@Bacho86 has recently fitted his Darren. He has a GU4.

http://www.nissanpatrol.com.au/forum...l=1#post740503
Quote Originally Posted by Rossco View Post
Hey Nath nah shouldn't light up without a trailer but as soon as you plug it in should be blue. Don't know how but knows when attached to the brakes will light up red when braking then. Took a while to calibrate mine probably half a K of on off brakes before it knew which way it was going.

Sent from my GT-I9506 using Tapatalk
Quote Originally Posted by Bacho86 View Post
Install and wired up the redarc tow pro elite this arvo, easy enough job just time consuming for a novice!!

When I tested everything it was showing about 5v at the rear trailer plug pin no. 5, which increased to just shy of 12v when the controller was turned up to 10 and I applied the brakes.... however the controller led's never worked - no green, blue, red light or otherwise.... given I didn't have a trailer connected is this to be executed?

Should the redarc led's be lighting up during normal driving without a trailer?

@Yeti'sbeast @Rossco

Sent from my iPhone using Tapatalk
Quote Originally Posted by Bacho86 View Post
Awesome thanks for the confirmation, hopefully picking up the camper in the next couple days so will be able to try it out!


Sent from my iPhone using Tapatalk
Quote Originally Posted by Yeti's Beast View Post
When you first connect the camper the LED might flash various colors for a while, but that's just the unit calibrating. Once it's settled it will remain blue while connected as Rosco said.

Cheers


Sent from my iPhone using Tapatalk Pro
Bacho do you have the wiring detail you used? Wondering if it will transfer from my existing controller which is stuffed