First prototype guys!
Got to sort the seal and goretex valve install now and then smash it around a bit.
Prototype 1 by Ben Kincade,
First prototype guys!
Got to sort the seal and goretex valve install now and then smash it around a bit.
Between Patrols ATM. Had a beaut GU with 6.5 Chev TD. Next is a GU ute with a 4.5 litre Cummins conversion and a camper on the back.
Cuppa (2nd July 2017), DX grunt (2nd October 2017), gubigfish (2nd July 2017), MB (2nd July 2017), NissanGQ4.2 (2nd July 2017), the evil twin (2nd July 2017), threedogs (2nd July 2017), Touses (2nd July 2017), TPC (2nd July 2017), Winnie (2nd July 2017)
Woohoo! Well done & it looks just as good as the virtual ones! Quite an achievement. Fingers crossed that testing goes well.
2006 4.2TDi ex-Telstra Remote area Camper. Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies
A Nomadic Life (Blog)
FNQGU (3rd July 2017)
That looks awesome! I hope it works and lasts as good as it looks.
Sent from my SM-G935F using Tapatalk
I'll tell you I have been looking at space cases to fit one or 2 to the roof rack because they are a good size. I don't want something too tall. I think your sizing is bang on. Will wait to see you product before making a purchase. Nice work.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
FNQGU (3rd July 2017)
Got to do some real torture testing first and then refine a little more I suspect. Coming together though.
Thanks for the support guys.
Between Patrols ATM. Had a beaut GU with 6.5 Chev TD. Next is a GU ute with a 4.5 litre Cummins conversion and a camper on the back.
MudRunnerTD (3rd July 2017)
have you got a pic of the underside? is it smooth so it can be dragged across surfaces or ribbed and must be lifted?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Underside will fit the lid ridges to assist with stacking. There are some vague sketches around here somewhere to later play with a wheeled version but at this stage it looks like the below.
If you mean for dragging it across the top of another box, then we've put in two lengthways ribs to help that go smoothly.
Underside by Ben Kincade,
Between Patrols ATM. Had a beaut GU with 6.5 Chev TD. Next is a GU ute with a 4.5 litre Cummins conversion and a camper on the back.
MudRunnerTD (3rd July 2017)
Thanks mate. Yeah I have found with the cheap tubs that the ribs can catch and grab in carpet and rough surfaces and break off. The cheap ones with wheels also don't last well with wheels ripping off.
Surfaces that it might get dragged across would be checkerplate in the bottoms of the camper trailer, carpet on top of the rear drawers in the GU, carpet on the floor at home, concrete driveway. Roof rack mesh.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
FNQGU (4th July 2017)
Well, day one of torture testing and we busted a hinge-pin! Back to the drawing board on the hinge for a bit then try again.
Still, happy with a lot of the other features and it is a nice smooth interior like we wanted. The grips also are nice and comfortable and the latches work great, so not all bad news. Just a bit more work to do yet.
Expedition Box 2 by Ben Kincade,
Expedition Box 1 by Ben Kincade,
Between Patrols ATM. Had a beaut GU with 6.5 Chev TD. Next is a GU ute with a 4.5 litre Cummins conversion and a camper on the back.
4bye4 (11th July 2017), MudRunnerTD (11th July 2017)
Looks great.
2 questions.
1. Is the lid strong enough to sit on or stand on?
2. Are the latches or the lid lockable with a padlock or something?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Posting Permissions
Reply With Quote
