Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
First is for conection direct to cylinder, second could be for a manifold setup.
I wouldn't touch either of them as I don't think the pressure ratings are high enough for the cylinders in Australia. Vaguely remember about 20 years ago we had to replace all our regulators at work because of an increase in cylinder pressure rating. The newer regulators have guages that go up to 30MPa
Reply With Quote