Turbo Upgrades for the GUIV TD42Ti

**MudRunnerTD** · 3rd December 2016, 06:45 PM

Originally Posted by nissannewby

Umm seems a bit rough mate. I though you owned a grinder and a welder? I have a bigger version of this turbo than you and managed to get the dump to fit with no firewall beating. The 6758 is not a big turbo mate. The factory manifold sits the turbos a long way back. You would have had the same issue with a china 18g. The ufi come with a dump pipe but they are very tight and only juat clear the firewall.

Hi mate, yeah I actually did cut the adapter off that bend and cut another 25mm off the bend then manipulated it back on and welded the flange back on. It's a full 3" mandrel bend and it hit by a lot !! It's on a hoist tomorrow for s new dump pipe, I was hoping to use this but he will cut it off and go again. I expect he can jog it up pretty easily. Crazy tight mate!! We maybe bashed the footwell corner back maybe 20mm or so. Tight!

Sent from my iPhone using Tapatalk

**nissannewby** · 3rd December 2016, 06:49 PM

Originally Posted by MudRunnerTD

Hi mate, yeah I actually did cut the adapter off that bend and cut another 25mm off the bend then manipulated it back on and welded the flange back on. It's a full 3" mandrel bend and it hit by a lot !! It's on a hoist tomorrow for s new dump pipe, I was hoping to use this but he will cut it off and go again. I expect he can jog it up pretty easily. Crazy tight mate!! We maybe bashed the footwell corner back maybe 20mm or so. Tight!

Sent from my iPhone using Tapatalk

Yeah you can get tighter bends. I used a 3" donut to make mine. It would have been fine to leave off to drive to the exhaust shop.

**rusty_nail** · 3rd December 2016, 06:57 PM

Originally Posted by nissannewby

Yeah you can get tighter bends. I used a 3" donut to make mine. It would have been fine to leave off to drive to the exhaust shop.

Andy did say that about a dozen or so times lol, Darren was concerned about getting exhaust on his firewall

Sent from my E6782 using Tapatalk

AB · 3rd December 2016, 07:03 PM

Originally Posted by rusty_nail

Andy did say that about a dozen or so times lol, Darren was concerned about getting exhaust on his firewall Sent from my E6782 using Tapatalk

He was determined...lol

AB · 3rd December 2016, 08:48 PM

Originally Posted by MB

Ripper beard you got going there these day Dazman! Tis the season to be jolly :-) Sent from my iPhone using Tapatalk

You're a wizard Harry!

**MudRunnerTD** · 3rd December 2016, 08:50 PM

Originally Posted by AB

You're a wizard Harry!

Shit head.

AB · 3rd December 2016, 08:52 PM

Originally Posted by MudRunnerTD

Shit head.

It's bloody funny though cmon!!!!

Nailed it!

**MudRunnerTD** · 3rd December 2016, 08:56 PM

Originally Posted by AB

It's bloody funny though cmon!!!!

Nailed it!

Hagred!!! Bloody Hagred!

AB · 3rd December 2016, 08:58 PM

Gotta love Aussie humour, any possible inkling to put down a mate

**Maxhead** · 4th December 2016, 06:23 AM

Well done lads! I'm glad a got a zd30 CRD and don't need to worry about any of these upgrades=)

Sent from my iPhone using Tapatalk

User Tag List

Thread: Turbo Upgrades for the GUIV TD42Ti

Thread Tools

Display

The Following 2 Users Say Thank You to nissannewby For This Useful Post:

The Following User Says Thank You to rusty_nail For This Useful Post:

The Following 4 Users Say Thank You to AB For This Useful Post:

The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:

The Following 2 Users Say Thank You to AB For This Useful Post:

The Following 3 Users Say Thank You to MudRunnerTD For This Useful Post:

The Following 6 Users Say Thank You to AB For This Useful Post:

The Following 5 Users Say Thank You to Maxhead For This Useful Post:

Posting Permissions