AB's now two steps closer with @rusty_nails help today!
Positive outcome, 6 sets of chopsticks were salvaged from the old donk, time to clock off, grubs up :-)
Sent from my iPhone using Tapatalk
AB's now two steps closer with @rusty_nails help today!
Positive outcome, 6 sets of chopsticks were salvaged from the old donk, time to clock off, grubs up :-)
Sent from my iPhone using Tapatalk
BigRAWesty (23rd October 2016), Clunk (24th October 2016), jay see (23rd October 2016), macca (24th October 2016), rusty_nail (24th October 2016), Touses (24th October 2016), TPC (23rd October 2016), Winnie (23rd October 2016), Woof (23rd October 2016)
Yep good day, most things now done but down to the custom stuff now which will take a bit of time but almost there!
BigRAWesty (23rd October 2016), Clunk (24th October 2016), growler2058 (23rd October 2016), jack (23rd October 2016), jay see (23rd October 2016), Kimbo63 (23rd October 2016), mudski (23rd October 2016), TPC (23rd October 2016), Winnie (23rd October 2016), Woof (23rd October 2016)
Look at that sexy black top its wearing. Silver is so, yesterday.Originally Posted by AB
AB (24th October 2016), BigRAWesty (23rd October 2016), Woof (23rd October 2016)
Good stuff mate!!
Sent from my BV6000 using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
AB (24th October 2016)
Went to pirtek today and got my existing water and oil feed lines modified to suit new block.
Longer oil feed for alternator too.
Turbo is now complete!
Much better to finally feed oil to turbo on the same side of block now!
BigRAWesty (24th October 2016), MudRunnerTD (25th October 2016), Sherro (25th October 2016)
What's next Andy?
Getting close mate...
Replace spigot bush
Blanking plate on vac pump
Fuel pump install
Backing plate, clutch, flywheel...clutch and flywheel is done ready to be picked up.
Fan, belts, etc
Tacho sensor
Waiting for new bracket for power steering
Oil and coolant and filters.
Need idler pulley
Engine in, connect everything up...
Probably missed something but that's what comes to mind so far?
BigRAWesty (24th October 2016), macca (26th October 2016), MudRunnerTD (25th October 2016), Winnie (24th October 2016)
You forgot one.
Wipe smile off face after first start up/drive.😂.
Good luck with it all.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
BigRAWesty (24th October 2016), DX grunt (24th October 2016)
Special thanks to Bennyboy!!!
He's loaning me a vac pump so I can get going until I can find a second hand one.
They are ridiculous $$$ to buy brand new so at least I can get going until I find one.
BigRAWesty (26th October 2016), Clunk (26th October 2016), Kimbo63 (26th October 2016), MB (25th October 2016), MudRunnerTD (25th October 2016), mudski (25th October 2016), Stropp (26th October 2016), TPC (25th October 2016), Winnie (25th October 2016)
Posting Permissions
Reply With Quote
