The user compiled manual with tips on how to do various jobs is great.

But in the manual I have, lifted from here, sm7e-2y61g1 sec br page 7,
has a different procedure, (having trouble inserting a picture for some weird reason).
not having a shot at any body for a split second, may be I missed something.
After having trouble re- setting the lsv due to lift, referred to my manual & found this procedure.
Don't doubt for a second angle needs to be closer to 90deg after a suspension mod but maybe just not as critical to 90deg as one may think going by this manual pic.
Also in this manual a LSV is fitted to both non abs & abs equipped models.

straight from y61 manual
Ensure vehicle is unladen condition.
Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions .

Have a driver sit in the driver’s seat and one person sit on the rear end. Then have the person on the rear end slowly get off the vehicle. This is necessary to stabilize suspension deflection.
Gradually depress brake pedal and attach a lever to the stopper bolt, then adjust length “L” as follows: Length “L”: Approx. 175.2 - 178.2 mm (6.90 - 7.02 in)

cheers