How's the spring angle and panhard clearanceOriginally Posted by rusty00
How's the spring angle and panhard clearance
Cheers
Kallen Westbrook
Changed oil and oil filter. And this I what the sump plug washer looks like. Not fiber like dickbrain at Sprint Auto Parts tried selling me
Sent from my iPhone using My thumbs
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Woof (24th July 2016)
@bigguwesty
Everything looks good.
I think I took the correct photosimage.jpegimage.jpegimage.jpeg
2012 GU8
BigRAWesty (13th August 2016)
Installed my new UHF antenna, replaced my passenger door & window & gave her a fresh oil change before next weekend. Getting very excited now!
'96 GQ TD42t
AB (24th July 2016), growler2058 (24th July 2016), mudnut (24th July 2016), rusty_nail (28th July 2016), threedogs (28th July 2016), Winnie (24th July 2016), Woof (24th July 2016)
Replaced the bearings on me Kaymar Swing-away wheel carrier today! Well overdue - Been bugging me for ages!
'09 3L CRD Gu Wagon - 3" Mandrel Bent Exhaust, 2" OME, Nitto Trail Grapplers, ARB Bull Bar, Warn Winch, Side steps, Safari Snorkel, ARB Alloy Rack, ARB on Board Compressor, Dual Batteries, Kaymar Rear Dual Bar, EBC, Reversing Camera, Outback Drawers, Fridge Slide, ARB Cargo Barrier & Divider, Rear Door Diner, Long Ranger Tanks, GME 3350s/6.6DBI, 240 Lightforce XGT's, 42' Roof Mounted Illuminator Light Bar.
What did they end up being??
Cheers
Kallen Westbrook
I ended up buying them from Kaymar, they were a bit dearer then buying online, but the service from them was excellent, and I'm a big one for supporting business that goes above/beyond.
Nicole who I spoke to provided me the part numbers if I wanted to source them myself, (when she could have just sold me kaymar brand with the higher price tag of $36 a set)
So, I paid a little more, but was worth it when you get good, friendly service!
'09 3L CRD Gu Wagon - 3" Mandrel Bent Exhaust, 2" OME, Nitto Trail Grapplers, ARB Bull Bar, Warn Winch, Side steps, Safari Snorkel, ARB Alloy Rack, ARB on Board Compressor, Dual Batteries, Kaymar Rear Dual Bar, EBC, Reversing Camera, Outback Drawers, Fridge Slide, ARB Cargo Barrier & Divider, Rear Door Diner, Long Ranger Tanks, GME 3350s/6.6DBI, 240 Lightforce XGT's, 42' Roof Mounted Illuminator Light Bar.
BigRAWesty (25th July 2016), threedogs (28th July 2016), Woof (25th July 2016)
Awesome..
That info is always valuable incase shoit hits the fan when middle of nowhere..
I guess it's a similar reason I went ford bearings with my van.. they are a bigger bearing but should be well stocked across australia..
Cheers
Kallen Westbrook
threedogs (28th July 2016)
Yep that's the one! A smart choice by the manufacturer rather then making a specialist sized bearing that only they sell, they've actually thought about the practicality of it which is a nice change!
'09 3L CRD Gu Wagon - 3" Mandrel Bent Exhaust, 2" OME, Nitto Trail Grapplers, ARB Bull Bar, Warn Winch, Side steps, Safari Snorkel, ARB Alloy Rack, ARB on Board Compressor, Dual Batteries, Kaymar Rear Dual Bar, EBC, Reversing Camera, Outback Drawers, Fridge Slide, ARB Cargo Barrier & Divider, Rear Door Diner, Long Ranger Tanks, GME 3350s/6.6DBI, 240 Lightforce XGT's, 42' Roof Mounted Illuminator Light Bar.
BigRAWesty (29th July 2016)
Saturday/yesterday: finished wiring in the electric brake controller and new 7 pin plug, upgraded the earth on the plug while I was at it and hey, now I have really nice bright trailer lights. Then replaced the starter motor, what a prick of a job it is getting at that top bolt. Not bad once you've done it once, but the first time, working out which extensions etc.. What a pain! Then put in the brake bias extension bracket. Then went and bought a camper trailer. Busy weekend haha.
Chappy (25th July 2016)
Reply With Quote
