Humm, looking at the wiring on solenoid something could be wrong.
The factory fitted cables to the solenoid ,which are colour coded, are not connected to the numbered post as the manual states.
Yellow is on post number 1, & Red is on post number 3.
But manual clearly shows and written, has them the other way around.
I rang supplier and they said, its ok we test every winch.
but I' not so convinced the solenoid is tested also, every nut and bolt has not been touched ex factory ie-not a mark on em.
Any input welcome, have no experience with this type of solenoid before.
Its a Domin8r 12000lb winch package
DSCF8577.JPG
DSCF8583.JPG.
Well I rang em again, hoping to talk with someone else.
This time
Quote
"yes the instructions are clearly wrong it's also covered buy a 5 yr warranty, your covered , fit it as supplied and it will be ok ( don't you guys test winch on a test bench) no we even test the solenoid with the winch" end quote.
I hope this helps others having the same problem.DSCF8566.JPG
Reply With Quote
