Threedogs motor thread

**jay see** · 15th April 2016, 06:46 PM

Originally Posted by the evil twin

If you want to fill, drill and retap then Devcon is the go... we used it in the RAAF and that shit is awesome.
Can be drilled, tapped or machined
Even rebuilt a busted water pump housing with it on my Ski Boat years ago
but....
it isn't cheap and would be only if you cannot get a housing thingy

http://www.devcon.com/prodfiles/pdfs/fam_tds_107.pdf

I've used this stuff when I was an apprentice. As hard a steel and yes we did machine it on a lathe.

**Irish** · 16th April 2016, 07:12 AM

Originally Posted by threedogs

Bumped for any takers please...........

I can do it around 1pm, will need both of you to PM me your addresses though.

**threedogs** · 16th April 2016, 08:09 AM

Originally Posted by Irish

I can do it around 1pm, will need both of you to PM me your addresses though.

PM sent and thanks for this
Its OK Mark is dropping it off
this morning

**threedogs** · 16th April 2016, 08:10 AM

Originally Posted by the evil twin

If you want to fill, drill and retap then Devcon is the go... we used it in the RAAF and that shit is awesome.
Can be drilled, tapped or machined
Even rebuilt a busted water pump housing with it on my Ski Boat years ago
but....
it isn't cheap and would be only if you cannot get a housing thingy

http://www.devcon.com/prodfiles/pdfs/fam_tds_107.pdf

I have some 2 part stuff they use at QANTAS so must be a similar product

will have a replacement housing this arvo so this wont be required

**jay see** · 16th April 2016, 08:56 AM

It's turning out to be a group effort. What a head fark for a fairly simple job.
Good onya Mark and Irish.
Sorry I can't get out there this weekend John

**BigRAWesty** · 16th April 2016, 09:01 AM

Atleast you know you have pressure in the system..
The boys will get it sorted bloke..

**threedogs** · 16th April 2016, 12:02 PM

Another big thanks to Mark, what with trying to sell his house and all.
Anyway new thermostat housing fitted, I tested the stat and it worked fine.
Now only the alternator , shroud and fluids to finish oh and the viscous fan, lol

**Bloodyaussie** · 16th April 2016, 01:00 PM

You can thank me later......lol

**Irish** · 16th April 2016, 02:10 PM

Originally Posted by jay see

It's turning out to be a group effort. What a head fark for a fairly simple job.
Good onya Mark and Irish.
Sorry I can't get out there this weekend John

Don't thank me mate, all Mark today, he wore John out before I had a chance to rock up.

**threedogs** · 16th April 2016, 02:34 PM

Originally Posted by Bloodyaussie

You can thank me later......lol

Caravan puller,,,,,,lol

User Tag List

Thread: Threedogs motor thread

Thread Tools

Display

The Following User Says Thank You to Irish For This Useful Post:

The Following User Says Thank You to threedogs For This Useful Post:

The Following User Says Thank You to threedogs For This Useful Post:

The Following 2 Users Say Thank You to BigRAWesty For This Useful Post:

The Following 3 Users Say Thank You to threedogs For This Useful Post:

The Following User Says Thank You to Bloodyaussie For This Useful Post:

Posting Permissions