Threedogs motor thread

[jay see]

What I think I have is some stuff I can put in the old thread
let it harden and then just re tap it, but I think a heli coil
would be a better fix, No rush now lol
Is it called chemi weld or similar

No no no.

Helicoil or Mark's housing.

[mudski]

No no no.

Helicoil or Mark's housing.

Yeah dont cut corners John... Helicoil will work fine.

Sent from my GT-N7105T using Tapatalk

[threedogs]

Cool ,all work was done using a 3/8 socket set either that
or my 1/4 drive set I had,

Mark hasnt got a housing has he John??

[threedogs]

I do have this other housing here mate. I can shoot it across sometime tomorrow. Unless someone is going past Mill Park to your way.

That would be awesome Mark when
I repair my one Ill drop it back to you.
Sorry didnt see this earlier

[jay see]

Can anyone confirm if that chemi weld putty would be up to the task

As far as I know chemi weld goes in the radiator.

[threedogs]

Yeah must of got the name wrong doesn't matter now as we wont be using it,,,,,lol

[threedogs]

I do have this other housing here mate. I can shoot it across sometime tomorrow. Unless someone is going past Mill Park to your way.

Bumped for any takers please...........

[paulyg]

Don't know about the chemi weld, JB weld might work.

[the evil twin]

If you want to fill, drill and retap then Devcon is the go... we used it in the RAAF and that shit is awesome.
Can be drilled, tapped or machined
Even rebuilt a busted water pump housing with it on my Ski Boat years ago
but....
it isn't cheap and would be only if you cannot get a housing thingy

http://www.devcon.com/prodfiles/pdfs/fam_tds_107.pdf

[jay see]

Could you tap it out to 10mm John might get you out the sh|#

Don't think that would work.
The holes that are on the engine housing would need to be drilled out bigger. Probably could as a last resort.