What did you buy today

[GeeYou8]

he sold out but has relisted more. Hope this link works...
http://www.ebay.com.au/itm/111758800425?_trksid=p2057872.m2749.l2649&ssPageNa me=STRK%3AMEBIDX%3AIT

I got one very similar from BOC around $72 inc. GST
Graham

[GeeYou8]

On the VW modification side, a friend was involved with fitting the throttle body injection from a 1.8 Camira (Pulsar would be the same and would make it a little bit Nissan) onto beach buggy. Machined down the distributor to fit, bolt on the throttle body and some sensors (I think they use oil temp instead of coolant temp), lots of power & better economy. They found the ECU from an automatic was better than the one from a manual.
Graham

[threedogs]

Might have to break my mig out and start using it a bit more.
Cost me $1400 so its a heap of $$ just sitting doing nothing.
Now BOC have a fair price for gas, I do like using it though
I must admit, no chipping slag of wire brushing welds

This style easy out arrived, hopefully Ill never need them

[threedogs]

On the VW modification side, a friend was involved with fitting the throttle body injection from a 1.8 Camira (Pulsar would be the same and would make it a little bit Nissan) onto beach buggy. Machined down the distributor to fit, bolt on the throttle body and some sensors (I think they use oil temp instead of coolant temp), lots of power & better economy. They found the ECU from an automatic was better than the one from a manual.
Graham

There are quite a few 10 second street legal Vee Dubs going around, or at least hidden
only to be driven on club days

[lucus30]

Might have to break my mig out and start using it a bit more.
Cost me $1400 so its a heap of $$ just sitting doing nothing.
Now BOC have a fair price for gas, I do like using it though
I must admit, no chipping slag of wire brushing welds

This style easy out arrived, hopefully Ill never need them

I should really get my self some easy outs. Don't have any at all

[threedogs]

@ Lucas you may never use them but you'll be glad
you have them if a bolt breaks, I have both styles

[mudski]

Some steel to mod my ARB Deluxe Steps into a slider/ step. This will be interesting. Lol

I should really get my self some easy outs. Don't have any at all

Everytime I use an easy out, its not so easy and I bust them. So then the welder comes out...

[BigRAWesty]

Sent from my iPhone using My thumbs

You know this will need it's own build thread.....

[my third 256]

Ls1 time?

>>>tappin from tassie

and the finished project if the missus takes over
fin.jpg
watch out if you drive on the beach at goolwa going to the mouth
shark.jpg

[BigRAWesty]

Scangauge ordered..