Thanks katwoman ans mudski.
We're probably getting a 65l waeco. Taller than both of yours and side hinge rather than end hinge on the arb so I have a feeling this might be an issue.
I'll have to have a really good measure up but I may have to reconsider building my own.
One thing I've noticed with these steel draws (in general) is they all seem to be really catious about extended weight on the draws..
My outback draws have about a 300mm over lap on the draw when fully extended..
That's a crazy huge amount..
I'm going to pull mine out and mod it so it has a 100mm overlap and you can actually get stuff out from the back of the draws..
I'll assume the fridge slide top is the same but not sure how easy that is to mod..
Cheers
Kallen Westbrook
I stood in my drawers fully open...
Sent from my GT-N7105T using Tapatalk
BigRAWesty (15th February 2016)
yeah but look at the size of you mate! haha, i dont know if the drawers would support the weight of our more "sturdily built" members hahahaOriginally Posted by mudski
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
BigRAWesty (15th February 2016), threedogs (15th February 2016)
Little bird told me that TJM will soon have a drawer system of their own.
About time, I say lol
There must be a way to make a drop down that doesn't cost the earth
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
juzzs8 (10th October 2016)
If it can hold me it can hold anything you put in them.
Sent from my GT-N7105T using Tapatalk
rusty_nail (16th February 2016), threedogs (15th February 2016)
PM sent ,if you do build your own,,,,,, cage the fridge in so you can pack gear on top as well.
You can buy fridge cages, Ill see if I can find a link
I think these are a great idea,,,,
http://www.ebay.com.au/itm/Steel-Fri...item20f4f9fc37
Im sure you could buy a sheet of mesh and do the same thing for a lot cheaper
Last edited by threedogs; 15th February 2016 at 03:09 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
BigRAWesty (15th February 2016)
When you find one let me know.
Might replace my solid mdf fridge surround with cage / mesh setup for ventilation reasons...
Attachment 64866
Tapatalked from S6
2005 TD42TI
Mate I'd go to Robot buy a sheet of mesh and go from there, might only cost $60 for a large sheet.
enough to make some covers for the cargo area windows as well ,protect you tint a bit.
You can buy special clips to hold it all together or just tack weld in a few places.
Last edited by threedogs; 15th February 2016 at 03:22 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
MSA make cages. Very expensive though
Posting Permissions
Reply With Quote
