cruise control 97 GU ti patrol

[altech]

Hi Guys, turn the Cruise control on the other day , nothing was happening , but the Cruise dash light flashing. any ideas whats Wrong ? regards Alex

[04OFF]

Start with the easy basics first , check your brake lights are working confirming switch is ok

[threedogs]

Bumped for the 12v guru's

[altech]

Start with the easy basics first , check your brake lights are working confirming switch is ok

hi 04off, I think there are all working , But I have changed to Led globes on the Bumpers not long ago !!!!!!!!!!

[threedogs]

Just for test purposes change the globes back, it may be the problem
even though I can't see how ,less resistance
When did you first notice the problem?

[altech]

Just for test purposes change the globes back, it may be the problem
even though I can't see how ,less resistance
When did you first notice the problem?

Hi 3dogs, yep finally change the globes back to normal and Cruise control Works again cheers for the input regards Alex

[the evil twin]

Very common problem with a very simple fix.
You need to put a ballast resistor across the LEDs to dump the floating voltage that develops via the CC.
This voltage makes the CC think the brake pedal is depressed

[Yendor]

Glad to see you got it sorted, just for future reference was your high mount also an LED or a standard incandescent bulb?

[Kimbo63]

Glad to see you got it sorted, just for future reference was your high mount also an LED or a standard incandescent bulb?

Hi Yendor
Pretty sure the 97 gu is the same as my 98 and come without globes in the high mount lights but not 100% sure on Ti model
Cheers Kimbo

[Yendor]

Thanks Kimbo,

I'm not asking about the body tail lights. I'm asking about the single high mount brake light that is fitted in the top of the large barn door.

Maybe altech bulb has blown?