Rockets Wagon

[Hodge]

Have you thought about a high flow water pump? Myself and BA run one from JPC, ableit expensive, my temps do rise but fall quick. Ba has hadbetter success with it as he had something to compare it too. I didnt. I had one in from new.
No complaints about temps from me. Yet.

Sent from my SM-P600 using Tapatalk

This is exactly what I want to do in the new year after speaking with Mark the other day. This pump which is around $450, not including fitting, and a RC radiator, together with full system flush.

[mudski]

This is exactly what I want to do in the new year after speaking with Mark the other day. This pump which is around $450, not including fitting, and a RC radiator, together with full system flush.

Ehats wrong with your current radiator?

Sent from my SM-P600 using Tapatalk

[Rocket55]

It's half blocked up. I could get it cleaned out and rodded, or I could start again with a fresh 3 core unit.

[Rocket55]

Started doing the gearbox mounts tonight and all was going well. Cross member out ready to undo the mounts.



Drivers side out and in, easy



Then the passenger side, 1 bolt out and then this happens, not happy Jan!!!

[mudski]

Err thats a bummer. Hope you got some good drill bits and enough room to drill into it.

Sent from my SM-P600 using Tapatalk

[Rocket55]

Your telling me. Theres no reason for it to be that tight, all the others once cracked were pretty much finger tight to get out, I don't get it. I'll try an hit it with a punch and see what happens, if not then start drilling and head up the shop in the morning for some Easy-Outs.

[mudski]

Hmm good luck.

Sent from my SM-P600 using Tapatalk

[Rocket55]

That might do for tonight, have to go up the shop later and get some tools and another bolt.

[Hodge]

What a bastard, at least it's not in a awkward spot.

[Robo]

Not a welcome site broken bolts, good luck.
some freeze spray up the center of hole may help to shrink it a little to help loosen it.