Having a little trouble trying to fit steel mate alarm into 2002 gu.
My oem remote system was working fine but wanting to add the alarm.
And utilize the existing wiring for the central lock side of things.

going buy the wires feeding to oem central lock remote unit top right behind glove box, colours are the same as previously described.
oem plug
white = 12v pos,
2xgreen =2x indicators,
2xblue = 2xactuators.

steelmate
2x yellow =12v pos
2x brown = indicators
white and white/black = actuators.
Iv'e hooked up for pos actuators and not the neg ones.
obviously power & earth are connected.

The drivers door is a master right?
and the oem remote plug is connected to it, why would't it be!

press new remote lock/unlock and blinkers flash= working.
test light is showing white wires are active BUT
the lock/unlock actuators wont activate in either direction.
Nothing is happening!
put the oem remote back in, works just fine.
think I have a dud steel mate alarm.
thankfully I hadn't hook up all the other functions for the alarm, ignition cut etc as it appears that may of been a waste of time.
any one have any ideas?????