Went 4wding for the first time in this rig and after a couple of mumps the 4wd light started to work, and continued for the rest of the day, next morning was back to no 4wd light, had to go and find the track I broke my tail light on to find a bit that fell off my rear bar, 4wd light started working again, where under the car is the connector for the 4wd switch, i can trace it up the side of the transfer case but that's as far as I can follow it, if someone can tell me where the connector is I'll give it a good clean out with contact cleaner, and make sure its a firm fit.. Am assuming the fact that after some bumps when 4wding and the light starts to work it must be a back connection or something.. any advise appreciated...