What did you buy today

**BSRT.Beast** · 21st October 2015, 05:41 PM

Went to buy a drivers side guard of a guy in Mornington for $50 ended up with 2 for $70 both have been on a car but have never had a real coat of paint and are still in the panel black as new. Perfect condition.

**Bacho86** · 21st October 2015, 08:08 PM

20L of penrite oil for $119 from repco ready for the next service!

Sent from my iPhone using Tapatalk

**Hodge** · 21st October 2015, 08:15 PM

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

**Bacho86** · 21st October 2015, 09:27 PM

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

Yeh combination of things...I have normally used the 15w-40 but I couldn't get that on special in the 20L drum at the time. Plus penrite specifies that the 15w-50 can also be used when 15w-40 is specified, so we'll see how it goes!

I'm dropping it off with ATOC to get fixed over the new couple days, so fingers crossed!

Sent from my iPhone using Tapatalk

**BigRAWesty** · 22nd October 2015, 01:01 PM

Another project for the time off.. pick it up tonight

**threedogs** · 22nd October 2015, 01:23 PM

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

I run a 5/40 with no problems

**Stropp** · 22nd October 2015, 02:19 PM

Originally Posted by biggqwesty

Another project for the time off.. pick it up tonight

i have one almost identical, i notice the butterfly damper on the top of the fire where the flue goes is missing but you can make that up, just a circle of metal with a handle to damp it down and slow the burn. they are a very good heater btw

**BigRAWesty** · 22nd October 2015, 02:23 PM

Originally Posted by Stropp

i have one almost identical, i notice the butterfly damper on the top of the fire where the flue goes is missing but you can make that up, just a circle of metal with a handle to damp it down and slow the burn. they are a very good heater btw

Yea friend of mine has one inside and it's good..
Was looking for more an oven but guess I can still make that 😆

**taslucas** · 22nd October 2015, 02:53 PM

Originally Posted by Hodge

Nice Bacho. Curious how come you went for 50 viscosity. Summertime?

Also how did you go with your rear main seal.

Penrite has a new line called "extra 10", you can see it on the label there. Basically with "new technology " all their ratings go up by ten. But as said above, it is still compliant to 40 specs.

tappin from tassie

**threedogs** · 22nd October 2015, 04:43 PM

Originally Posted by biggqwesty

Yea friend of mine has one inside and it's good..
Was looking for more an oven but guess I can still make that 😆

I had mine in manland and it just rusted away, now running a mates Coonara style heater

User Tag List

Thread: What did you buy today

Thread Tools

Display

The Following 3 Users Say Thank You to BSRT.Beast For This Useful Post:

The Following 2 Users Say Thank You to Bacho86 For This Useful Post:

The Following User Says Thank You to Bacho86 For This Useful Post:

The Following 2 Users Say Thank You to BigRAWesty For This Useful Post:

The Following User Says Thank You to Stropp For This Useful Post:

The Following User Says Thank You to taslucas For This Useful Post:

The Following User Says Thank You to threedogs For This Useful Post:

Posting Permissions