What has made you Angry Today???????

**Maxhead** · 21st October 2015, 05:52 AM

Missed another episode of "Days of our NissanPatrol.com.au".
Looks like a good one too

**BigRAWesty** · 21st October 2015, 06:04 AM

Originally Posted by SiberianPatrol

Getting the beast up on a lift and finding out that the aftermarket hub seals that I just replaced are already shot. Will have to source some genuine Nissan seals and replace them.

Your not wrong. There fubar'd

**Bloodyaussie** · 21st October 2015, 06:40 AM

Originally Posted by katwoman

I really, really hope your joking BA. But, if you not don't let me stop you from moving on. Just leave the TD42 at the door on your way out, that you wouldn't have if it wasn't for "this place"

Well that is the clincher right there.... What a thing to say... And those that thank those comments are gutless.

**BigRAWesty** · 21st October 2015, 06:56 AM

Common mate even I can read that as a meaningless dig..
I can remember you giving much worse than that..

**Winnie** · 21st October 2015, 07:11 AM

Jonathan you need to stop and think about the situation you are getting into here. Everybody is not against you, we're all mates here don't forget. Just relax and take a break if you need.

**Maxhead** · 21st October 2015, 07:17 AM

Originally Posted by Bloodyaussie

And those that thank those comments are fucking gutless.

If you had some balls I would think you're serious.....bwahahahahaha

Sent from my iPhone using Tapatalk

**nissannewby** · 21st October 2015, 07:39 AM

Originally Posted by SiberianPatrol

Getting the beast up on a lift and finding out that the aftermarket hub seals that I just replaced are already shot. Will have to source some genuine Nissan seals and replace them.

You need to make sure you lube them up when installing otherwise they grip and do what you have pictured. Most likely not the seals fault and even a genuine item will do the same if not lubricated when fitted

**threedogs** · 21st October 2015, 08:46 AM

Originally Posted by biggqwesty

Your not wrong. There fubar'd

Just shows you , genuine is better,be it extra $$$,,,,, well on some items

**liftlid** · 21st October 2015, 10:28 AM

Originally Posted by Bloodyaussie

Well that is the clincher right there.... What a thing to say... And those that thank those comments are gutless.

Good to see this has been edited from the original version. Thanks

**mudski** · 21st October 2015, 10:34 AM

Originally Posted by SiberianPatrol

Getting the beast up on a lift and finding out that the aftermarket hub seals that I just replaced are already shot. Will have to source some genuine Nissan seals and replace them.

Originally Posted by rusty_nail

Hit mark (mudski) up hell probably have em bud.

Sent from my E6782 using Tapatalk

Dont have those Nic...

Going by the looks of it, they were either installed back to front or the ball section is too badly pitted and just grabbed the seal and pulled them out. Which I think the latter is correct. They look pretty dry and dirty. When changing those seals its a good idea to rub the ball section down with emery paper to make them smooth and then just coat them with a fine smear of grease.

User Tag List

Thread: What has made you Angry Today???????

Thread Tools

Display

The Following 4 Users Say Thank You to Maxhead For This Useful Post:

The Following User Says Thank You to BigRAWesty For This Useful Post:

The Following User Says Thank You to BigRAWesty For This Useful Post:

The Following 3 Users Say Thank You to Winnie For This Useful Post:

The Following User Says Thank You to Maxhead For This Useful Post:

The Following 4 Users Say Thank You to nissannewby For This Useful Post:

The Following 2 Users Say Thank You to threedogs For This Useful Post:

The Following User Says Thank You to liftlid For This Useful Post:

The Following User Says Thank You to mudski For This Useful Post:

Posting Permissions