Gawd wouldn't that be funny....Originally Posted by nissannewby
Sent from my SM-P600 using Tapatalk
Gawd wouldn't that be funny....
Sent from my SM-P600 using Tapatalk
Extremely hilarious! lol
But no, there is no lock bolt, and yes the pin is out...
Come to think of it considering how rusty my car was underneath when I bought it, this doesn't surprise me one single bit to be honest.
What are you using to soak it with? Inox is way better than WD or CRD. I have some rust converter shite from POR15 here you could try spraying in to try and release the rust...
Crc , trouble is, no way to get the crc to penetrate through enough...
Sent from my SM-T705Y using Tapatalk
2005 TD42TI
Hit the crap out of it around the sides to try and break it free. It will eventually move I reckon.
Last edited by mudski; 14th October 2015 at 09:51 PM.
chain it to something like a big tree, then drive away .....
got a drum it will fit in ? old engine oil in the drum leave it for a few days.
tried hitting it in? might shake it loose. got a sledge you could borrow
if its worth doin its worth over doin
Hodge (15th October 2015)
I had the same problem, trouble is what I did has already been suggested for you and not worked. For what its worth, I just kept squirting WD40 and Inox into it. Then heated it with a torch and tapped it side to side until I got some movement. Then I hammered it using a drift (bit of old steel axel) on the ball and nut (ouch) and it came out , albeit a mm at a time. I still had it mounted on the truck which made hammering it out a bit easier.
love the smell of burning Inox in the morning.
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
Telstra has enraged me again today !!! So have a lot to take out on this thing.... And yeah I have tried hitting it in as much as hitting it out. The amount of force with a large sledgy this has copped is un believable and it just keeps smiling back at me....
Eric I have a 16lb sledge hammer and an old axle. if you bring it around we can belt the living Begeezus out of it
can you get up the back side of it clearly
Have you tried freezing it??
We can make a plate to fit down the rhs
Last edited by threedogs; 15th October 2015 at 04:30 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Go find a tree out of the way tie the tow bar to it
hook it up with a chain to yours and low gear and
try and pull it out
lower to the ground the safer it will be you,l feel
it if it starts to give
just gentle tugs mate gentle
Hodge (15th October 2015)
Posting Permissions
Reply With Quote