04 gu bus...

[mullet_hunter]

Oil catch workn a treat...



Sent from my SM-N915G using Tapatalk

[Sir Roofy]

And the oil level is the same

[threedogs]

Can you put a pic of your ECU-talk after its warm and idling please

[mullet_hunter]

Sent from my SM-N915G using Tapatalk

[threedogs]

Thanks , keep an eye on the rear IC hose they have a habit of blowing off.

[mullet_hunter]

Ye 26psi will make it do that... been meaning to upgrade hoses and clamps fora while nw just cnt be bothered...

Sent from my SM-N915G using Tapatalk

[Softy]

How many km's have you done with the catch can installed? That is my last thing to do to complete "NADS"

Also what intercooler is that? I need to piss the crap factory one off and get one with welded tanks.

[mullet_hunter]

No too sure on kms.. maybe 1000km...

Sent from my SM-N915G using Tapatalk

[mullet_hunter]

Fitted it pretty much as soon as i got it... while doing ur nad mods.. if not already done.. id be pulling the manifold off and cleaning the blowby sludge inside.. then refit with in line catch can.. dawes n needle valve.. blockd egr and clean maf sensor...

Sent from my SM-N915G using Tapatalk

[Softy]

Cheers.. Yeah i have EGR Block, Dawes/Needle etc.. just need the catch can.. Might pull the manifold off but probably not. My engine doesn't seem to breath to heavy so hoping it isn't to bad.