Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Yeah i am going for the manual glow system. its the best way to go when converting the TB loom...
I had another look at it all last night briefly with fresh eyes after reading your previous post and i now think from what you were saying previously that i have identified the wire in question. I was confused by another yellow plug which i now believe is a coolant temp sensor for the auto choke idle bypass circuit... I think i have identified the gauge temperature sensor wire as the red and white wire in the 6 pin square engine harness plug that runs to a single sensor on top of the block / thermostat housing. I will confirm this 100% when i remove the TB cluster and replace the taco, im sure its right, but between myself and my mate Stuart who is a pretty handy sparky, we get it..
Thanks for the info Rossco, what you said helped me nail it down... I appreciate the advise and assistance..
Reply With Quote