TB42e to TD42t Conversion - Lots of pics!

[Rossco]

Quote .. " I grafted out the wires from the TB harness for the coolant temp gauge and warning light so they are now functional"

Can i get your advise here please mate, could you let me know how you hooked up your coolant temp gauge, the TB loom disappears in to the dark void of wires for this and im left scratching my head and rubbing my chin...

Thanks

Hi Andy, there's just one wire that goes to the temp sender (just next to the thermostat housing) on both TD &TB ( unless the TB E is different, mine was a carby). I just put a new terminal on and hooked it up. Same with the oil pressure sender, there the same just hooked it up and it all worked fine. Saw on your post that you labeled everything, that's what i did, it certainly helped. . . Best of luck with it. . . .