yeah I'll try, Ive been able to source all the fittings in stainless, .so it should be all smooth running from
76 at the MAF housing right down to 50mm at the turbo, using one 45 in 76mm and a 90 elbow long radius
in 63mm Ill need to tig an elbow in to it to run a line in AN8 the catch can, and braided as well,
Probably end up wrapping it to keep it cooler, might be interesting to see the figures though not huge lol
There is a pipe under the airbox I need to figure out if its required or not, nearly there