mudnut's 'Old Trol' build thread.

[mudnut]

Bump...........

[threedogs]

did you get any washers ,??? I'm going to TJM tomorrow so I see what they have lying around lol

[Bloodyaussie]

did you get any washers ,??? I'm going to TJM tomorrow so I see what they have lying around lol

You have a GU John measure yours for him???

I thought they were all the same length but not sure at all.

[threedogs]

TJM Coburg are shifting to Mattews Ave Opposite Ess. airport entrance .
Hoping there will be heaps of GQ gear hidden in the back corners,
Anyway if its there I hope its going cheap, None of the guys have GQs
they are mainly T boys

[mudnut]

Yeah, I got the washer from Readies and have drilled a hole through the stripped section of the panhard stud, cut a slot in the nut, and have fitted a cotter pin to ensure the panhard stays put.

[threedogs]

Cool I'll still see whats available for GQs

[mudnut]

The fusible links are becoming a hard item to obtain, TD.

[mudnut]

It now sounds as if the power steering pump bearing is on its way out. Has any one ever stripped a pump and reconditioned it?

[Bloodyaussie]

Jesus mate you must be so hard on your car driving rally style everywhere. ..lol

[mudnut]

It has had a few swims in deep muddy water, so I think its all catching up with me now. I was hoping it is possible to take the pulley and circlip off, flip the seal off the bearing and re-grease it until I can get some dough to replace the pump.