55 litre water bladder

[threedogs]

I'll grab some this arvo for you.
When I do my next one it'll be alloy not stainless.

I'd stick to food grade stainless looks better and more importantly tastes better

[threedogs]

The only thing I don't like about the boab idea is the hump divides the last 10l.. So if your stationery you'll drain one side and then have to go the other.
Small issue.
But good units.

dont Boab have outlets on both ends of that style tank

[threedogs]

here's the water flow wont take long to fill a kettle imo

[Sir Roofy]

here's the water flow wont take long to fill a kettle imo

looks good mate quick cuppa on the side of the road now

[BigRAWesty]

dont Boab have outlets on both ends of that style tank

Yea they do. But one side will finish before the other.

Anyway.
You boys. Lol.
Yea I have a custom draw set up.
So my draws sit 380 high from the 3rd row foot well.. so the tank 360 high with a 100mm cut out to step into the foot well,
Is 220 at the top to 330 base, and 700 long. 1 full size baffle, 1x 3/4 outlet, 1 x 4" fill / inspection hole and 2 x 1/2 outlets for a hose gauge and breather.

Pics
ForumRunner_20150120_175408.png


ForumRunner_20150120_175418.png

[megatexture]

Boab build it in. So regardless of your car has one or not you have that separation for the last bit..

Can't you flip it over?

And Thanks for the pics kallen that's come up nice!

[BigRAWesty]

Can't you flip it over?

And Thanks for the pics kallen that's come up nice!

Umm. Not sure.
And thanks