Australia Day meet up 2015 at Nissheads property... 23rd - 26th Jan

[Bloodyaussie]

Why has the highmount not been fitted??

[Sir Roofy]

why has the highmount not been fitted??

cant do every thing mate like some of us could be a bit short on cash

[AB]

It's down at Dazs place and he's rebuilding his and kindly doing bits to mine!

Just saving money gents and strapped for time to head back down to finish it off.

He's resprayed it and its looking mint

[Bloodyaussie]

It's down at Dazs place and he's rebuilding his and kindly doing bits to mine!

Just saving money gents and strapped for time to head back down to finish it off.

He's resprayed it and its looking mint

If its not ready should we just chuck the low mount in... only take 30min???

[AB]

If its not ready should we just chuck the low mount in... only take 30min???

Thanks mate but well be right, I don't think ill have new tyres by then anyway so ill be limited in what I can do anyway.

[Ben-e-boy]

Bloodyaussie
Family4x4 + family
Rusty_nail + Tegan + neighbors
Nisshead, Fiona , Josh and Ben + 1 other family with a Patrol...hmmm or maybe more
Winnie + Amy
Growler, no wife n kid
AB and family
Rkinsey
Alitis007 + Belinda
Roofy and Jane
Steve, Kat and Boog

Appolofish
Stropp- flying in and hiring a truck
Boots
Relyimah
NissanGQ4.2 and maybe family
Matfew + family
HuskyinAuz(Scott)+ wife Kathy + dog(10yr old boxer)
Clarkie+ wife+ dog
Rossco and ???



Agronaught - maybe
Megatexture - maybe
Sooty10 - maybe
Lucus30 - maybe
Mudski - maybe
Drewboys - maybe
Biggqwesty - only if the wind is going east of Berossa Valley ..lol

I'm definfinatly out now, the ute wont be ready.

[Bloodyaussie]

I'm definfinatly out now, the ute wont be ready.

Thats terrible Benny... whats the situation??

[Winnie]

I'm definfinatly out now, the ute wont be ready.

Damn man, was looking forward to seeing you and the ute again.

[rusty_nail]

I'm definfinatly out now, the ute wont be ready.

Bad luck Benny, u can always fly down and jump in with someone!

[Ben-e-boy]

Nothing is wrong, the block is still at the shop in the clean room so it dosnt rust, and I cant get at that until the 12th.
I am also able to put my pump on the test bench and make some changes to the compensator and maybe change the cam plate, but not until atleast the 12th. Also make a new intake manifold and I'm still working too, only had chrissy and new years off really.

I'm just not going to rush, it has to be spot on