I've heard that the early gu had a fan on the intercooler. I was wondering if there is somewhere in the loom to get power for the relay that is switched with the ignition on later gu's. Mines a 2011. Or where would other people suggest to get the power from. I don't want a switch I just want it to turn on with the car.
Originally Posted by remdogg
just tap into the ignition switch understeering wheel
or pm yendor
If you want to keep it all in the engine bay, you could switch a relay using the windscreen wiper motor ignition feed.
No need to pass anything through the firewall..
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
Remdogg (31st December 2014)
I got mine off the wipers and put in a switch
Remdogg (31st December 2014)
You heard wrong.
Be aware that a fan on a stock setup will do bugger all above about 40 to 50 KPH and actually starts to restrict flow at highway cruise due to the fan motor becoming an obstruction.
If you do fit one I recommend installing it as a puller under the I/C.
A 9 inch slim line fits perfectly and I had one on my CRD when I used to do a lot of low speed 'wheeling
It will mount nicely using the fins on the side of the 'cooler frame
I would not advocate mounting it using the bolts "thru the core" method
If you mount it as a pusher then a screen in the scoop so it doesn't swallow small stones then jam them between the blades and core and damage the intercooler is a good idea.
Easy source of ign switched power is as prev posted by others - the wiper motor
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
Posting Permissions
Reply With Quote