So we can make another celeb rip thread when his wheel falls off lolOriginally Posted by Hodge
So we can make another celeb rip thread when his wheel falls off lol
Hodge (30th November 2014)
Took it to the beach
1417339345864.jpg1417339363963.jpg
If ya not using it buy a prius .....
Not mine, my mates Mav got new alloy radiator, all new hoses, new belts and new plugs
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Went for an early morning beach run to ledge point to catch a couple of guys who camped out overnight, sand was very powdery couple of them had to drop their tyres to 6 lb to get off the beach.
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
katwoman (30th November 2014)
The fan was making a weird noise when switched on high. Stripped the fan motor and cleaned it out. I found it is due for new brushes soon. While I had the fan out I also took the housing out and found that the screen I fitted was fairly dusty and had some leaves and rat droppings on it. I fitted a dust filter between the fan and air conditioner so being in a dusty convoy will be an even more pleasant experience.
My advice is: not to follow my advice.
I have had a slipping fan belt on the GuIv for the last couple of weeks so thought I better sort that today. I had a full set of spare belts that I have for touring and thought bugger it, time for a change so stripped out all 3 belts and replaced with new ones. The belts are probably the originals and 235,000 kms old, they were certainly in need of a change.
Good result.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Poor maintenance Darren!
MudRunnerTD (1st December 2014)
Pretty much finished porting and polishing the intake side of the head, alot of hours went into and it is still not professional quality
96 GQ coil/Cab
08 G6eT
growler2058 (1st December 2014), mudnut (30th November 2014), MudRunnerTD (1st December 2014)
How much meat have you taken out,and what sort of power gain are you expecting to achieve?
My advice is: not to follow my advice.
Not alot of meat, there isnt alot to take, just a polish to 320 grit really. I wont be doing the exhaust because there isnt much meat there and it takes so long to do
Might get 10-15 hp maybe. The heads are pretty good out of the box
96 GQ coil/Cab
08 G6eT
mudnut (30th November 2014)
Reply With Quote
