Thanks Parksy (and also Macca86!). It all makes sense, but I thought it was a good opportunity just to take it in. Was pretty sure one of the pros would give some advice, as they did. Looks like it has come up fine for you too.
Thanks Parksy (and also Macca86!). It all makes sense, but I thought it was a good opportunity just to take it in. Was pretty sure one of the pros would give some advice, as they did. Looks like it has come up fine for you too.
Thanks, Cameron
No Patrol now - Just good memories!
Parksy (16th November 2014)
Couple of toys arrived today.
Even thought about replacing the gearbox today. Took one look at it and gave up...
IMO and should be taken with a grain of salt.
Oh for f$Łks sake Andrew come down here and put some of that effort into my rig would ya!!!!!!
I am still hoping you will suddenly say yes guys I am coming to the Australia Day meet up.... not far at all from your place mate... wink wink nudge nudge !!
Parksy (21st November 2014)
Haha where is the meet up Jono? I will have to do it one day.
IMO and should be taken with a grain of salt.
Threads here Parksy..... http://www.nissanpatrol.com.au/forum...ad.php?t=29510Originally Posted by Parksy
Parksy (21st November 2014)
Near ACT huh? That's about 2 hours from my place. Not far at all.
IMO and should be taken with a grain of salt.
Gonna be one not to be missed parksy!
Parksy (21st November 2014)
Sounds that way. Will have to try my best. Unfortunately work and babies dictate my life at the moment but who knows, maybe a day trip is on the cards...
IMO and should be taken with a grain of salt.
Bloodyaussie (21st November 2014)
Installed new ignition coil. Got rid of the occasional miss I had at idle and revs much better.
It's the big red box on the firewall. Four nutserts and it's not going anywhere.
IMO and should be taken with a grain of salt.
Killed my drill drilling the radius arm bolt holes.
Hard to take a photo of the smoke, but this was after a 5 min wait.
So desperate times call for desperate measures...
Had to remove the front of the press drill for it to fit... Bloody horrible job.
IMO and should be taken with a grain of salt.
Clunk (24th November 2014), growler2058 (23rd November 2014), NissanGQ4.2 (23rd November 2014)
Posting Permissions
Reply With Quote
