Hi guys I have a gq patrol with an rd28t and was wondering how do I test the back 3 glow plugs I did the front 3 with a test light but the back 3 don't light up even after I bought 3 new one thinking that they were buggered
Hi guys I have a gq patrol with an rd28t and was wondering how do I test the back 3 glow plugs I did the front 3 with a test light but the back 3 don't light up even after I bought 3 new one thinking that they were buggered
The back 3 glow plugs don't have a circuit to the body of the glow plug. You need to check the resistance between the two connections on the glow plug.
Justo102 (25th October 2014)
Thanks mate looks like I blew $180 on plugs lolOriginally Posted by Yendor
Would any one have a picture or diagram of the replay
It's normally the second glow plug relay that fails. The one with five wires.
The GQ 2.8 glow plugs have a first stage and a second stage.
If you connect a voltmeter to the long busbar you should see the following reading
Stage one : Around 12 volts
Stage two : Around 6 volts.
Voltmeter connected to the short busbar
Stage one: Around 0 volts
Stage two : Around 12 volts
Justo102 (29th October 2014)
Posting Permissions
Reply With Quote