its for his vibrator
its for his vibrator
growler2058 (24th September 2014)
its actually ProjectA, but no experience with them,Originally Posted by Nisshead
Most use either Piranha or Redarc
http://www.ebay.com.au/itm/PROJECTA-...item33871b4946
Is this the one
Last edited by threedogs; 24th September 2014 at 08:28 AM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
It is? This is their logo
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
They may have changed their branding but when first on the market it was ProjectA.
but most call it Projecta. No big deal though lol Ring them lol
potatoes potartoes
Last edited by threedogs; 24th September 2014 at 11:04 AM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
No, it's more like POTATOES PotatoeS
Who gives a crap!!!!!!!!!!!!!
katwoman (24th September 2014)
The mystery button. Any ideas? Yes I've pushed it
The Projecta 100amp
Annd what's this for???
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Trace the wires from the switch and see where they go? Maybe the battery isolator override? Hear any relays when it is switched?
I think the 2nd switch is the engine idle up switch used to warm the motor up quicker? Have you pressed that one?
This GU thing is too complicated for your old brain!
BigRAWesty (24th September 2014)
As Winnie said, the switch on the right is a fast idle switch, it is disabled as soon as you accelerate.
The switch under the fuel cap release could be for anything, usually a blank hole there.
Yeah I reckon it might be to link batteries. What Winnie said trace the wires should solve it.
Nice truck good luck with it sure it will progress nicely. Shame I never got to meet old g
growler2058 (24th September 2014)
Agree with shitbag, it's the override switch and the idle up switch
The idle up will disengage as soon as you put it into gear and then stop working when temp is up
Manual override(this is from their website, I'm not that cleva)
Manual override is activated by connecting the override
wire to 12V DC. This bypasses the automatic voltage sensor
allowing the relay to be engaged below the set voltages.
Last edited by Maxhead; 24th September 2014 at 06:09 PM.
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Posting Permissions
Reply With Quote
